An inside look at the SONiC Supra GTE Conversion Kit

*Click here for link to the Supra GTE Tech Note

by Reg Riemer

This is how it all starts, with a complete Mk III MA-71 Supra Turbo wiring harness on my shop floor.  Never mind the Lambo its another project :-)

This is the completed A harness for a 83 Supra GTS this A harness is one of three that are required to complete the conversion to the 7M-GTE

As you can see the Mk III wire loom's are full of wires, all engine control groups are isolated

This is the modified 5M-GE pan that will find its way onto the bottom end of a fire breathing 7M-GTE Modified in a lucky 1982 to 1985 Supra

The outside of the pan is coated in black ceramic coat and the inside is done in a special dry film coating.

Here is a side view of my custom tig welded and x rayed 7M-GTE pickup for the Mk II supra application

This is a the HKS SS flex section that comes on on the HKS down pipe for the MK III, I have ordered in a number of these little babies as well as flanges for the 7M-GTE.  These parts will allow owners to build custom Down pipes for their Mk II or Mk III Supra Turbo cars  :-)

Ready for fun in the sun :-)

Gauge Cluster mod using the MK III tach in the MK II dash

Supra Owners Network In Canada FROM THE HOME OF THE SUPRA GTE
Information provided is given free of charge in good faith without prejudice
Visit my Supra Page at
Calgary Alberta Canada.

Back to SONiC Home Page

Back to SONiC SonicTech Pages

too much info on these pages you should run for the hills